glocksmith – Viking Armory

GlockSmith Block v2

I want to provide an update to the GlockSmith block . With this version it has a trigger jig and small parts storage. You can remove and install the trigger pin, remove and install the firing pin cups, adjust your connector.

Also included are top and side working pin storage

GlockSmith Block v2 with top pin storage

I added pin storage on the side. I put them there when I am done.

GlockSmith Block v2 with side pin storage

Modified all the pin holes so the factory pins can be used and wont fall all the way through.

GlockSmith Block v2 trigger with factory Glock pin

GlockSmith Block v2 trigger removal with factory Glock pin

You can use the Glock pins I sell

GlockSmith Block v2 trigger removal with our Glock pin

or the factory pins:

This works for all the pin holes.

You can pick one up HERE

Get the pins with it HERE

Glock Maintenance Pins

These are great if you need to test and disassemble your Glock frame multiple time in one sitting. Such as adjusting your trigger shoe, trigger housing, or adjusting your connector.

They can be used to dry fire your Glock, to check to see if more changes are required. If there are, you can use the handle to easily remove the pins and make your adjustments.

DO NOT use for live fire!

When you are done, you can push them out with the factory pins or pull them out and install your factory pins and head to the range.

Pickup your set HERE

Glock Slide Vises!

Wish you had a 3^rd hand to hold your Glock slide while you are working on it? Trying to adjust your sights or add an optic? This tool is for you. There are 3 models one for each slide type/size.

The images here might show different slide sizes, the tool functions the same for all of them.

After you separate your slide from the frame, you slide the block in from the back of the slide. It will be a snug fit, you might have to pinch the sides to get it to slide in.

You do not need to remove any parts from your slide to get it to work. In most cases you are going to want to keep the block to the back of the slide, where most of your work is going to be done.

Glock Slide Block showing the adjustment screw

The Glock slide tool is made from non-marring plastic that is softer than the slide. Over time is will wear and become loose, to correct that, I added a tightening screw. As you thread it in it will spread holding the slide tighter.

With the barrel and recoil spring removed the Glock slide block can be used at any position on the slide.

Thanks for looking, You can buy one HERE

Glock Connector polishing notes

Do a basic polish. When that is done put a very slight bevel on the face of the ledge.

Side Drawing and Picture of connector before:

Very slightly bevel the face of the ledge.

All Documents posted on this site are for informational use only. If you make ANY modifications to your Weapons based on this site, you do at your own risk! If done incorrectly, you can render you weapon unsafe and / or unusable.

More HERE: https://viking-armory.com/?page_id=723

Johnny Glocks Evolution trigger Install

Here is a recent Johnny Glocks Evolution trigger I installed. This post is not to show how to install it or review it. There are plenty of articles on both out in the wild. This is just to show what one of my installs for this product look like:

This is what you get:

Slide it in place:

Put the pins back in:

Drop the slide back on, function check and ready to shoot!

Hit us up with comments or requests

More HERE: https://viking-armory.com/?page_id=723

Glock Performance Trigger Tool

Putting the trigger bar back in place on Glocks performance trigger is a PITA. I created this very little tool to help out.

Instructions:

Here is a quick Video:

– Push the Trigger Spring with Sear-holder up

– Slide the Performance Trigger Tool through the round hole, opposite side of where the trigger bar will slide in

– Push the Trigger Spring with Sear-holder down, holding it in the down position ensuring the spring rod pushes on the slave pin.

– Install the trigger bar making sure that the lower extension / pin is in the Performance Trigger Tools open hole.

– Slide out the Performance Trigger Tool

Ready to install!

Buy it from our EBAY store!

Hit us up with comments or requests

DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. or GLOCK Ges.mbH. Neither Viking Armory nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.mbH. The use of “GLOCK” on this page is merely to advertise the sale of Glock parts, or components. For genuine GLOCK, Inc. and GLOCK Ges.mbH products and parts visit www.glock.com

More HERE: https://viking-armory.com/?page_id=723

Glock Safety Plunger Holder and Polishing

When polishing any small part like the Glock safety plunger using buffung wheels on my grinder the part would at times go flying out and get damaged or temporarly lost. To help with that I create and print the Glock Safety Plunger Holder. I have different versions for different models and generations:

Plunger Holder.stl:

Glock Gen 1-5 Sfty Holder — Plunger Holder.stl

Glock Gen 1-5 Sfty Holder Reverse — Plunger Holder.stl

Gen 5:

Plunger Holder Shallow.stl

Glock Gen 1-5 Sfty Holder Shallow — Plunger Holder Shallow.stl

Glock Gen 1-5 Sfty Holder Shallow Reverse — Plunger Holder Shallow.stl

Gen 5:

Plunger Holder with Lip.stl – I am testing this one out. I added the lip to see if it would help hold the Glock Safety Plunger a bit better…

Glock Gen 5 Sfty Holder with lip Gen 5 — Plunger Holder with Lip.stl

Plunger Holder G43 G48.stl

Glock G43-G48 Sfty Holder — Plunger Holder G43 G48.stl

Plunger Holder G43 G48 Shallow.stl

Glock G43-G48 Sfty Holder Shallow — Plunger Holder G43 G48 Shallow.stl

Plunger Holder G43 G48 Reverse.stl

Glock G43-G48 Sfty Holder Reverse — Plunger Holder G43 G48 Reverse.stl

Plunger Holder G43 G48 Reverse Shallow.stl

Glock G43-G48 Sfty Holder Shallow Reverse — Plunger Holder G43 G48 Reverse Shallow.stl

I usually print these up when I have just a bit of filament left. Then toss it in a drawer till needed.

Hit us up with comments or requests

https://www.thingiverse.com/thing:5926916

More HERE: https://viking-armory.com/?page_id=723

Timney Trigger Glock Install

Here is a recent Timney trigger I installed. This post is not to show how to install it or review it. There are plenty of articles on both out in the wild. This is just to show what one of my installs for this product look like:

This is what you get:

Slide it in place:

Put the pins back in:

Drop the slide back on, function check and ready to shoot!

Hit us up with comments or requests

More HERE: https://viking-armory.com/?page_id=723

Glock Trigger Jig Update

I did not like the way the trigger housing moved when manipulating the trigger. So I added a brace. I printed it with tree supports that need to be cleaned up before using it.

Works pretty good!

Download HERE

Hit us up with comments or requests

More HERE: https://viking-armory.com/?page_id=723

Safety Plunger De-Bur and Polish

Glock pistols are mass produced using stamped parts. That is not a bad thing, just the way it is. Because of that, a part will sneak in with a less than desirable finish. I am of the belief that you should inspect all you parts for defects and burrs.

In this case, I found a bur on the safety plunger.

I filed down the burr with a small file, being careful not to remove to much material.

When it met my stringent standards I polished it up:

Dropped it back in, runs like a champ!

Hit us up with comments or requests

More HERE: https://viking-armory.com/?page_id=723