tools – Viking Armory

GlockSmith Block v2

I want to provide an update to the GlockSmith block . With this version it has a trigger jig and small parts storage. You can remove and install the trigger pin, remove and install the firing pin cups, adjust your connector.

Also included are top and side working pin storage

GlockSmith Block v2 with top pin storage

I added pin storage on the side. I put them there when I am done.

GlockSmith Block v2 with side pin storage

Modified all the pin holes so the factory pins can be used and wont fall all the way through.

GlockSmith Block v2 trigger with factory Glock pin

GlockSmith Block v2 trigger removal with factory Glock pin

You can use the Glock pins I sell

GlockSmith Block v2 trigger removal with our Glock pin

or the factory pins:

This works for all the pin holes.

You can pick one up HERE

Get the pins with it HERE

Foredom Yoke

I wanted to make a Yoke assembly for my Foredom motor, something like this one.

I had this big bearing from a previous project. This led me to create 2 versions:

Big Bearing:

And a standard 608 Skate Board Bearing version:

The insert works for both:

Looks and works pretty good! I have been using the large bearing version for around 6 months with no issue. I am not a heavy Foredom user, it is a tool in my tool box.

Download HERE

Hit us up with comments or requests

BCG to Buffer Space Gauge aka 2 Quarter Tool

I think School of the American Rifle started the 2 quarter spacing from the AR15 gas key and the receiver extension. I can not find an exact minimum spacing in the Army TM 9-1005-249-23&P Nov 2008. It makes too much sense for it not to be in there. If someone knows let me know and I will put it in the references.

I never have quarters in my pocket when I am working and if I do I will only have 2, what if I need it to fix a spacing issue? So I came up with this little gem.

It measures 2 quarters / 3.5mm thick and has a few stops to help hold it in place while you are cramming your BCG back trying to get the gauge.

BCG to Buffer Space Gauge aka 2 Quarter Tool with quarters

Stops to help hold it:

Opening to let the BCG slide in:

Showing the gap:

BCG to Buffer Space Gauge aka 2 Quarter Tool in use

Ref:

https://www.usmint.gov/learn/coin-and-medal-programs/coin-specifications

Posted on Thiniverse

Hit us up with comments or questions

All Documents posted on this site are for informational use only. If you make ANY modifications to your Weapons based on this site, you do at your own risk! If done incorrectly, you can render you weapon unsafe and / or unusable.

More HERE: https://viking-armory.com/?page_id=723

AR15 Gas Block Tool

A tool to help hold your gas block while you are trying to drive the gas tube pin in or out. It is plastic, if you beat on too hard or too many times it will break. Not to fear! it is a cheap and relatively fast print.

As an extra bonus, I created a extension tube holder!

AR15 Gas Block Tool 03 — AR15 Gas Block Tool group shot

Group shot:

AR15 Gas Block Tool 01 — AR15 Gas Block Tool working

Print your own! Files are on Thingiverse

Hit us up with comments or questions

More HERE: https://viking-armory.com/?page_id=723

Glock Trigger Jig

A quick jig to hold your Glock Trigger for maintenance and / or training. Kinda cool to pull the trigger and see how things work.

Also good if you are doing something like the 25¢ trigger job. See how everything is running before you drop it back in.

A quick jig to hold your Glock Trigger 02 — A quick jig to hold your Glock Trigger without trigger

I include the white trigger pin file ‘Glock Trigger Jig Pin.stl’. I just use one of the extra pins that come with the back straps for the trigger housing pin. I print it with supports, round part on the bed.

A quick jig to hold your Glock Trigger 01 — A quick jig to hold your Glock Trigger with trigger

Hit us up with comments or questions

Or you can print it your self. Files located HERE

More HERE: https://viking-armory.com/?page_id=723

Present Arms Sleeve

A sleeve to help hold your castle nut wrench firmly in place while cranking it down on your Present Arms Gunners Mount.

I can not claim this idea as my own, I was watching this video from School of the American Rifle and though “What a great idea”. I did not have any 1 ¼ inch PVC laying around, but I do have a 3D printer and PLA. This is what I came up with for the below wrenches.

Forward Controls:

Present Arms Buffer Tube Sleeve 05 — A sleeve to help hold your castle nut wrench firmly in place Forward Controls

Present Arms Buffer Tube Sleeve 02 — A sleeve to help hold your castle nut wrench firmly in place Forward Controls

Magpul:

Present Arms Buffer Tube Sleeve 03 — A sleeve to help hold your castle nut wrench firmly in place Magpul

Present Arms Buffer Tube Sleeve 06 — A sleeve to help hold your castle nut wrench firmly in place Magpul

Wheeler

Present Arms Buffer Tube Sleeve 04 — A sleeve to help hold your castle nut wrench firmly in place Wheeler

Family Shot:

Present Arms Buffer Tube Sleeve 07 — A sleeve to help hold your castle nut wrench firmly in place all 3

Present Arms on all sizes:

Present Arms Buffer Tube Sleeve 08 — A sleeve to help hold your castle nut wrench firmly in place Present Arms

Hit us up with comments or questions

More HERE: https://viking-armory.com/?page_id=723