trigger – Viking Armory

Glock Performance Trigger (GPT) Polish | Cleanup

DETAILS

The GLOCK Performance Trigger meets the criteria for those looking for an enhanced trigger pull and ergonomics, all while utilizing a flat-faced trigger and maintaining the same safety features of the GLOCK Safe Action System.

The GLOCK Performance Trigger is now compatible with 9mm Gen4 pistols. A Gen5 slide cover plate now ships with all GLOCK Performance Triggers, as an included replacement for Gen4 models that ensures compatibility and proper function. The GLOCK Performance Trigger will not come installed on any factory models. It is available as an accessory only and must be installed by a certified GLOCK Armorer. GLOCK does not recommend any aftermarket modifications to the GLOCK Performance Trigger.

Trigger Pull Weight: ∼ 5lbs.

Fits: Gen4 and Gen5 models G26, G19, G17, G34 and models G19X, G45, G47

Glock Performance Trigger factor packaging

Here is a picture of the housing and connector as it is out of the box.

Glock Performance Trigger factory housing

After a little work this is the polish I got on the trigger bar.

Other side.

Pay special attention to the surface that rubs the connector.

Glock Performance Trigger Bar connector surface

Also extra attention should be applied to the surface touching the safety plunger. Remember, you a polishing, careful not to remove too much material.

Glock Performance Trigger Bar Safety Bump

The factory Trigger shoe comes apart the same as all Glock trigger shoes.

I modify the safety as I describe HERE

Glock Performance Trigger Safety Modified

Then put it all back together and install it!

Go Shoot!

Johnny Glocks Evolution trigger Install

Here is a recent Johnny Glocks Evolution trigger I installed. This post is not to show how to install it or review it. There are plenty of articles on both out in the wild. This is just to show what one of my installs for this product look like:

This is what you get:

Slide it in place:

Put the pins back in:

Drop the slide back on, function check and ready to shoot!

Hit us up with comments or requests

All Documents posted on this site are for informational use only. If you make ANY modifications to your Weapons based on this site, you do at your own risk! If done incorrectly, you can render you weapon unsafe and / or unusable.

More HERE: https://viking-armory.com/?page_id=723

Timney Trigger Glock Install

Here is a recent Timney trigger I installed. This post is not to show how to install it or review it. There are plenty of articles on both out in the wild. This is just to show what one of my installs for this product look like: