Viking Armory – Veteran Owned and living the Dream
Here is a handy place to inventory and store your Glock parts
These trays are a great place to store and inventory your Glock parts. There are 2 high quality trays, 1 for you Slide (Upper) parts and one for the frame (Lower). Our Glock parts trays work for all Glocks. They stack when empty for convenient storage.
The Glock parts storage trays are great if you are working on multiple Glocks at the same time, lets you keep each Glocks parts together.
They stack for easy Storage!
After I made the plugs for the Firing Pin Protrusion Gauge Holder for iGaging Depth Gauge Digital Electronic Indicator, I realized 2 things.
1. I needed to sand down the plug just a bit so it would fit into the hole to get a negative reading.
2. I still had a hard time holding the bolt in a consistent manner. So I came up with the iGauge Firing Pin Protrusion Tool:
Naked:
Dressed:
Then I added spots for boat tail NO-GO and Field Gage:
Naked:
Dressed:
Hit us up with comments or requestsAll Documents posted on this site are for informational use only. If you make ANY modifications to your Weapons based on this site, you do at your own risk! If done incorrectly, you can render you weapon unsafe and / or unusable.
More HERE: https://viking-armory.com/?page_id=723
