gunsmith – Page 2 – Viking Armory

The Glock Ring

This is NOT to check the diameter of your barrel or anything else! Just to check if there is a bulge in your barrel.

Glocks method of checking the barrel is to remove the slide and push it the barrel hole and make sure it does not have a bulge. I wanted something I could use on barrels that are not installed without having to remove a slide.

This example is for 9mm Barrels. I measured several 9mm barrels and slides for Glocks and came up with 0.580 inch for the inner diameter. Because printers vary check before you use.

Just slide it over your barrel and check for a bulge. PLA is softer than the barrel so there should be no marring.

Hit us up with comments or questions

All Documents posted on this site are for informational use only. If you make ANY modifications to your Weapons based on this site, you do at your own risk! If done incorrectly, you can render you weapon unsafe and / or unusable.

More HERE: https://viking-armory.com/?page_id=723

Present Arms Sleeve

A sleeve to help hold your castle nut wrench firmly in place while cranking it down on your Present Arms Gunners Mount.

I can not claim this idea as my own, I was watching this video from School of the American Rifle and though “What a great idea”. I did not have any 1 ¼ inch PVC laying around, but I do have a 3D printer and PLA. This is what I came up with for the below wrenches.

Forward Controls:

Present Arms Buffer Tube Sleeve 05 — A sleeve to help hold your castle nut wrench firmly in place Forward Controls

Present Arms Buffer Tube Sleeve 02 — A sleeve to help hold your castle nut wrench firmly in place Forward Controls

Magpul:

Present Arms Buffer Tube Sleeve 03 — A sleeve to help hold your castle nut wrench firmly in place Magpul

Present Arms Buffer Tube Sleeve 06 — A sleeve to help hold your castle nut wrench firmly in place Magpul

Wheeler

Present Arms Buffer Tube Sleeve 04 — A sleeve to help hold your castle nut wrench firmly in place Wheeler

Family Shot:

Present Arms Buffer Tube Sleeve 07 — A sleeve to help hold your castle nut wrench firmly in place all 3

Present Arms on all sizes:

Present Arms Buffer Tube Sleeve 08 — A sleeve to help hold your castle nut wrench firmly in place Present Arms

Hit us up with comments or questions

More HERE: https://viking-armory.com/?page_id=723

AR Magazine Release Tool

I wanted a tool to help get the magazine catch pushed out of my M16/AR-15 without scratching or marring the metal. To compresses the spring and make removal of the magazine catch easier.

Looking around I saw AR Magazine Catch tools similar to mine on various web sites for around $10 without shipping. I am frugal and own a 3D printer, I decided to make one.

I know you can use many other things to push it out, such as, but not limited to, pencil, punch, your kids finger….If you have a 3D printer it is a quick and cheap print.

You can download the STL on Thiniverse

Here are a few pictures:

Hit us up with comments or questions

More HERE: https://viking-armory.com/?page_id=723