June 2022 – Viking Armory

Pistol Log Book

I have a log book for each of my pistols. I track what is installed, magazines, rounds fired per barrel and total. I also track, reload data and maintenance. I wanted to post it here to see if anyone has improvement ideas.

Pistol Log Book

Download it HERE

This is NOT my idea, I am not and dont want to take credit for it. I found pages on the internetz, took what I wanted and put them in a binder.

REF:

https://drive.google.com/drive/folders/0B9BsvElLB2ajTGxpT3l6bEtCcWM?resourcekey=0-vz0mnynOLvf5UtRJoeUuwg

Hit us up with comments or questions

All Documents posted on this site are for informational use only. If you make ANY modifications to your Weapons based on this site, you do at your own risk! If done incorrectly, you can render you weapon unsafe and / or unusable.

More HERE: https://viking-armory.com/?page_id=723

Glock Training Setup II – Adding a Little Flare

I got the Dry Fire Magazine Glock 19 Gen 5 half moon issue described HERE fixed. I designed and printed a magwell insert to plug the half moon and give me a little flare:

Dry Fire Magazine G19 Gen 5 Magwell Flare Insert

Just slide it in:

And your DryFireMag (DFM) will slide right in:

Safety Check…

Install the mag-well and slide the Dry Fire Magazine in:

Need to hold on a bit when removing the DFM

Hit us up with comments or questions

More HERE: https://viking-armory.com/?page_id=723

Glock training setup

I have had my MantisX and DryFireMag (DFM) for about a week and 250 ‘shots’. So far they have met all of my needs, I am happy with the purchase.

The only complaint I have is not with the DFM, it is my Glock 19 Gen 5 and the half moon hole in the mag well. It is yet another issue with Glocks short lived half moon.

There is no flare on the cutout, so the DFM pin wont slide in and allow the magazine to seat. You have to manually push the pin in until it is passed the half moon cutout. Then it will slide into position and work like a champ.

This is not an issue with other Glocks as the magazine wells are flared.

Just give it a good push, follow the instructions and you are in business.

When I use the MantisX with the Dry Fire Mag I want to leave my light on and train as I carry. I would also like to use all my existing holsters for holster drills. To accomplish this I made a base plate with a built in Picatinny rail to mount the MantisX on.

It is easy to install. Slide off the factory plate. Dont worry there are no springs that will pop out or parts that will fly. Slide on the new one.

Then Clip on the MantisX

Train.