Reloading Cleaning Solutions

Brass Tumbler: (HF)
  • In each tumbler drum I put:
  • 1 ½ lb of stainless steel media (at the most)
  • About 5 lb of brass
  • Warm Water up to the lip or just below
  • Lemi-shine (1/4 teaspoon)
  • Squirt of Dawn (enough that when you open the drum you see soap suds)
  • 1/4 Cap Armor All Wax
  • Tumble for 2 hours.
Brass Tumbler: Frankford Arsenal Rotary Tumbler (FART)
  • 5 lb of stainless steel media
  • About 10 lb of brass
  • Room Temp Water up to the lip or just below
  • Lemi-shine (1/4 teaspoon)
  • Squirt of Dawn (enough that when you open the drum you see soap suds)
  • 1 Cap Armor All Wax
  • Tumble for 3 hours.
Ultrasonic RCBS Gun Cleaning Solution:  I use this solution to clean reloading dies and equipment
  • 30:1 Ratio
  • 60oz water
  • 2oz cleaner
  • Degas (only first time solution is mixed)
  • Set to ~120 degrees F
  • 5 min for tools
  • 15 min for gun parts
Ballistol Ultrasonic Cleaning Solution:

2 x 16 oz Ballistol $29

32 oz RCBS $23

Ultrasonic Brass Cleaning (Harbor Freight):
  • Lemi-shine (1/4 teaspoon)
  • Squirt of Dawn (1/4 teaspoon)
  • 15 Minutes

Hit us up with comments or requests

All Documents posted on this site are for informational use only. If you make ANY modifications to your Weapons based on this site, you do at your own risk! If done incorrectly, you can render you weapon unsafe and / or unusable.

More HERE: https://viking-armory.com/?page_id=723

Reddit
error: Content is protected !!