https://viking-armory.com/wiki/ 2026-05-04T14:36:41+00:00 https://viking-armory.com/wiki/ https://viking-armory.com/wiki/lib/exe/fetch.php?media=logo.png text/html 2026-01-17T17:09:01+00:00 Anonymous (anonymous@undisclosed.example.com) https://viking-armory.com/wiki/doku.php?id=ar:ar_pages&rev=1768669741&do=diff AR Pages AR Torque Values Small_Parts text/html 2026-01-17T17:09:01+00:00 Anonymous (anonymous@undisclosed.example.com) https://viking-armory.com/wiki/doku.php?id=ar:ar_torque&rev=1768669741&do=diff My Torque Values: AR Compensator (Flash hider) No Torque, timing value with the procedure in the Army TM. Hand tight and then tighten a minimum of 90 degrees but no more than 450 degrees to timing. Don't over tighten, don't loosen. AR Barrel Nut 30 Ft. lbs. Minimum, not to exceed 80 Ft. Lbs. to align the next slot in the barrel nut. The 80 Ft. Lbs is not stated in the TM, but I don't know how you would line up the gas tube, in certain situations without going over 30 Ft. Lbs. Unless you use sh… text/html 2026-01-17T17:09:01+00:00 Anonymous (anonymous@undisclosed.example.com) https://viking-armory.com/wiki/doku.php?id=ar:small_parts&rev=1768669741&do=diff Small Parts Lists Getting Nuts and Bolts on the Cheap