Month: May 2024

GlockSmith Block v2

I want to provide an update to the GlockSmith block . With this  version it has a trigger jig and small parts storage. You can remove and install the trigger pin, remove and install the firing pin cups, adjust your connector.

GlockSmith Block v2 everything on it
GlockSmith Block v2 everything on it

Also included are top and side working pin storage

GlockSmith Block v2 with top pin storage
GlockSmith Block v2 with top pin storage

I added pin storage on the side. I put them there when I am done.

GlockSmith Block v2 with side pin storage
GlockSmith Block v2 with side pin storage

Modified all the pin holes so the factory pins can be used and wont fall all the way through.

You can use the Glock pins I sell

GlockSmith Block v2 trigger removal with our Glock pin
GlockSmith Block v2 trigger removal with our Glock pin

or the factory pins:

GlockSmith Block v2 trigger removal with factory Glock pin
GlockSmith Block v2 trigger removal with factory Glock pin

This works for all the pin holes.

GlockSmith Block v2 pins demo
GlockSmith Block v2 pins demo

You can pick one up HERE 

Get the pins with it HERE

Glock Maintenance Pins

These are great if you need to test and disassemble your Glock frame multiple time in one sitting. Such as adjusting your trigger shoe, trigger housing, or adjusting your connector.

Trigger Pin no slide
Trigger Pin no slide

They can be used to dry fire your Glock, to check to see if more changes are required. If there are, you can use the handle to easily remove the pins and make your adjustments.

DO NOT use for live fire!

When you are done, you can push them out with the factory pins or pull them out and install your factory pins and head to the range.

Trigger Pins with Slide
Trigger Pins with Slide

Pickup your set HERE

Twitter
Reddit
error: Content is protected !!